Acrylic panel docking: This is relatively simple. You only have to put the two acrylic panels that must be connected on the actual operation service platform, and then put the adhesive cloth on the bottom end to leave a very small gap for this interface method. Just introduce the adhesive. Acrylic panel slope pasting: The pasting slope must be profiled at a 90-degree angle to avoid movement of the bonded surface. The application of the adhesive should be well-proportioned and slow. You can take off the profiling after it is completely dry.
Acrylic panel façade pasting: Facade pasting is the most common type of pasting technique, and the surface to be pasted should be scrubbed and cleaned first. It is best to use the imitation model to complete the pasting, so that the paste does not shake, which is beneficial to improve the quality of the paste. For pasting on an organic board with a thickness of 2mm, thin iron wires can be inserted and attached by capillary action. The iron wires are drawn out before the adhesive is dry, or you can choose to use tape and then apply the adhesive.
Acrylic panel plane sticking: plane sticking is a more unique way of sticking. First, clean and clean the surface to be adhered, and place it horizontally, and put a suitable adhesive on it. Place one side of the other acrylic board diagonally to touch the acrylic board coated with adhesive, and then slowly learn to put it down evenly, driving away the bubbles from one side and then sticking. (Frequently asked questions: This type of adhesive will attack the acrylic board, so safeguard measures must be taken)
The surface strength of the acrylic panel is equal to that of aluminum profiles, and the surface layer should be prevented from being scratched during application or production. The surface layer of the plexiglass board is generally maintained with wrapping paper or protective film, and it is not necessary to tear it off as much as possible. The heat distortion temperature of the acrylic panel is about one hundred degrees, and the constant temperature is not suitable to be higher than ninety degrees. It is very easy to deform when placed in high temperature, so it should not be placed in areas with high temperature. Acrylic panels are prone to electrostatic induction, which absorbs dust. When cleaning, you can use a soft cotton cloth dipped in 1% soap to scrub. Acrylic panels have a certain coefficient of thermal expansion. When installing plexiglass panels (acrylic) panels, you must consider leaving a moderate retractable gap.
The above explained is the method of pasting acrylic panels. I hope it will be helpful to you after reading it. If you want to know more about acrylic panels, please contact customer service online or call our company’s service hotline (top right of the website) Corner) for consultation, we will be happy to provide you with quality service!
![Dongming Industry [HK] Co.,Limited](../upload/202009/1600585694.png "Dongming Industry [HK] Co.,Limited")
